Name: | Create bulb-girder sections with rounded corners |
Description: | Use the Section Designer to create a bulb-girder section with rounded corners. |
Program: | SAP2000 |
Version: | 14.2.0 |
Model ID: | |
Bulb-girder cross sections, such as that shown in Figure 1, may be created using the Section Designer.
To model a bulb-girder section, first open the Section Designer, then use polygons to draw the outline of the section without the corner radius, as shown in Figure 2:
Next, switch to reshape mode by selecting Draw > Reshape Mode. Click on the section, then right-click on each corner joint to specify a radius where needed, as shown in Figure 3:
Figure 4 presents the final bulb-girder cross section. All corners other than those at the extreme fibers are properly modeled with round corners.
Attachments
- SAP2000 V14.2.0 model (zipped .SDB file)