Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

Parametric variations can be used to vary certain dimensions of the bridge deck section along the length of the bridge.

On this page:

Examples

Several examples for the application of parametric variations are listed below:

  • The bridge modeler allows parametric variation of non-uniform girder spacing for certain decks, including advanced box girder, precast I girder, precast U girder, and steel girder. Girder spacing is adjusted to fit within the dimension of total width minus overhang distance, regardless of parametric variations specified.
  • The bridge modeler allows parametric variation of deck-section reference point in the local X and Y directions. This provides improved control over superstructure eccentricity relative to layout lines at regions of widening.

Applying parametric variations to bridges with skewed supports

The PDF file shown below shows how the program applies parametric variations to superstructures supported by skewed bents or abutments:

Error rendering macro 'viewpdf'

The viewfile macro is unable to locate the attachment "variations for skewed supports.pdf" on this page

 

 

 

 

  • No labels