Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Tutorial

Name:

2D-view cutting planes

Description:

Setting the tolerance for cutting planes within 2D views such that all desired objects are displayed.

Program:

SAP2000

Version:

14.2.0

Model ID:

<p>na</p>


Within 2D views, only entities within the 2D View Cutting Planes tolerance are displayed. If objects which should be displayed are not shown, tolerance may be increased through Options > Dimensions/Tolerances > 2D View Cutting Planes +/-.

The blue up and down arrows change the elevation at which the 2D view is taken, as shown in Figure 1:


  • No labels