Tutorials

Skip to end of metadata
Go to start of metadata
Tutorial

Name:

2D-view cutting planes

Description:

Setting the tolerance for cutting planes within 2D views such that all desired objects are displayed.

Program:

SAP2000

Version:

14.2.0

Model ID:

na


Within 2D views, only entities within the 2D View Cutting Planes tolerance are displayed. If objects which should be displayed are not shown, tolerance may be increased through Options > Dimensions/Tolerances > 2D View Cutting Planes +/-.

The blue up and down arrows change the elevation at which the 2D view is taken, as shown in Figure 1:


Figure 1 - Adjust view elevation