Tutorial
Name: | 2D-view cutting planes |
Description: | Setting the tolerance for cutting planes within 2D views such that all desired objects are displayed. |
Program: | SAP2000 |
Version: | 14.2.0 |
Model ID: | |
Within 2D views, only entities within the 2D View Cutting Planes tolerance are displayed. If objects which should be displayed are not shown, tolerance may be increased through Options > Dimensions/Tolerances > 2D View Cutting Planes +/-.
The blue up and down arrows change the elevation at which the 2D view is taken, as shown in Figure 1: