A lower software version may be run using a higher version license by creating (please see the specific examples below). See the version specific examples below. This may require creating and using a text file named level.txt within the installation folder of the earlier product version. However, this is not applicable between current web-activated licenses and previous conventional licenses (therefore, for example, the SAP2000 v15 product cannot use a SAP2000 v16 license). 

On this page:

Level.txt file

Create To create a level.txt file by creating , create a text file with the Product Level and Product Version of the current license (please see examples below for exact specifications). Rename the file as level.txt and copy into the location listed below.

...

CSiBridge Examples

...

Running

...

CSiBridge v21 using a CSiBridge v22 license

When running CSiBridge v21 using a CSiBridge v22, the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'PLUS', 'ADVANCED' or 'ADVANCEDRATING', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ADVANCED 22 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license –
  • Web-Activated License: 
    
    • License file: 
      • The CSiBridge v22

When running SAP2000 v17 using a SAP2000 v18 license, a level.txt is not required. 

Please see your licensing option below for the appropriate locations for where the activated license should reside: 

• Standalone license – 
  • License file: The SAP2000 v18
    • • license must be activated on this machine.
      • Copy the "lservrc" file from Computers and Structures >
    SAP2000 18
    • • CSiBridge 22 folder into the Computers and Structures >
    SAP2000 17
    • • CSiBridge 21 folder.
      • The "lservrc" file must be copied each time the
    v18
    • • v22 license is activated on this machine. Once
    v18
    • • v22 has been deactivated from this machine,
    SAP2000 v17
    • • the CSiBridge v21 product will also stop working.
     

• Network license – The SAP2000 v18 license will reside on the server for a network license. Once the client machines have been updated to the correct version of SAP2000 v17.3.0, the cilent machine will automatically pick up the SAP2000 v18 network ilcense. 

Example: Running CSiBridge 2015 (v17) using a CSiBridge 2016 (v18)  license

When running CSiBridge 2014 (v16) using a CSiBridge 2015 (v17), the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'PLUS', 'PLUSRATING', 'ADVANCED' or 'ADVANCEDRATING', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

• • • Level.txt: The level.txt file will also be copied into the CSiBridge v21 folder (Computers and Structures > CSiBridge 21)
  • Manual License (such as license locked to USB key):
    • License file: Copy the CSiBridge v22 "lservrc" file into the Computers and Structures > CSiBridge 21 folder (from Computers and Structures > CSiBridge 22 folder). 
    • Level.txt: The level.txt file will also be copied into the CSiBridge v21 folder (Computers and Structures > CSiBridge 21)

• Network license – The CSiBridge v22 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the CSiBridge 21 folder which contains the CSiBridge.exe.

Running CSiBridge v20 using a CSiBridge v21 license

When running CSiBridge v20 using a CSiBridge v21 license, a level.txt is not required. 

...

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • License file: The CSiBridge 2015 (v17) The CSiBridge v21 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > CSiBridge 2015 > CSiBridge 21 folder into the Computers and Structures > CSiBridge 2014 folder> CSiBridge 20 folder. The "lservrc" file must be copied each time the 2015 v21 license is activated on this machine. Once 2015 v21 has been deactivated from this machine, CSiBridge 2014 (v16)  CSiBridge v20 will also stop working. 
  • Level.txt: The level.txt file will also be copied into the CSiBridge 2014 folder (Computers and Structures > CSiBridge 2014)

• Network license – The CSiBridge 2015 (v17) license will reside on the Network license – The CSiBridge v21 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the CSiBridge 2014 folder which contains the CSiBridge.exe.

Example: Running ETABS 2013 using an ETABS 2015 license

• Once the client machines have been updated to the correct version of CSiBridge v20.2.1, the client machine will automatically pick up the CSiBridge v21 network license. 

Running CSiBridge 2017 (v19) using a CSiBridge v20 (2018) license

When running CSiBridge 2017 (v19) using a CSiBridge v20 (2018)When running etabs 2013 using a etabs 2015 license, the level.txt file created will contain one line with the following information:

...

Product level should be the level of the current license, for example: 'PLUS', 'NONLINEARPLUSRATING', 'ADVANCED' or 'ULTIMATEADVANCEDRATING', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license.  

For example:

NONLINEAR 2015 

Please note in this case, the product version for the current license is "2018" and not version "20".

For example:

ADVANCED 2018 

Please see your licensing option Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • Web-Activated License: 
    
    • License file:
    The ETABS 2015 license
    •  
      • The CSiBridge v20 (2018) license must be activated on this machine.
      • Copy the "lservrc" file from Computers and Structures >
    ETABS 2015 folder
    • • CSiBridge 20 folder into the Computers and Structures >
    ETABS 2013 folder
    • • CSiBridge 2017 folder.
      • The "lservrc" file must be copied each time the
    ETABS 2015 license
    • • v20 license is activated on this machine. Once
    ETABS 2015 has
    • • v20 has been deactivated from this machine,
    ETABS 2013 will
    • • the CSiBridge 2017 (v19) product will also stop working.
     
    • Level.txt: The level.txt file will also be copied into the
    ETABS 2013 folder
    • CSiBridge 2017 folder (Computers and Structures >
    ETABS 2013
    • CSiBridge 2017)

• Network license – The ETABS 2015 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the ETABS 2013 folder which contains the ETABS.exe.

Example: Running SAP2000 v16 using a SAP2000 v17 license

When running SAP2000 v16 using a SAP2000 v17 license, the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

• • Manual License (such as license locked to USB key):
    • License file: Copy the CSiBridge v20 (2018) "lservrc" file into the Computers and Structures > CSiBridge 2017 folder (from Computers and Structures > CSiBridge 20 folder). 
    • Level.txt: The level.txt file will also be copied into the CSiBridge 2017 folder (Computers and Structures > CSiBridge 2017)

• Network license – The CSiBridge v20 (2018) license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the CSiBridge 2017 folder which contains the CSiBridge.exe.

Running CSiBridge 2016 (v18) using a CSiBridge 2017 (v19) license

When running CSiBridge 2016 (v18) using a CSiBridge 2017 (v19), the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'PLUS', 'PLUSRATING'Product level should be the level of the current license, for example: 'BASIC', 'PLUS', 'ADVANCED' or 'ULTIMATE', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ADVANCED 17 

ADVANCEDRATING', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ADVANCED 2017 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • License file: The CSiBridge 2017 (v19) license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > CSiBridge 2017 folder into the Computers and Structures > CSiBridge 2016 folder. The "lservrc" file must be copied each time the 2017 license is activated on this machine. Once 2017 has been deactivated from this machine, CSiBridge 2016 (v18) will also stop working. 
  • Level.txt: The level.txt file will also be copied into the CSiBridge 2016 folder (Computers and Structures > CSiBridge 2016)

• Network license – The CSiBridge 2017 (v19) license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the CSiBridge 2016 folder which contains the CSiBridge.exe.

Running CSiBridge 2015 (v17) using a CSiBridge 2016 (v18) license

When running CSiBridge 2015 (v17) using a CSiBridge 2016 (v18), a level.txt is not required. 

Please see your licensing option below for the appropriate locations for where the activated license should reside: 

• Standalone license – 
  • License file: The CSiBridge 2016 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > CSiBridge 2016 folder into the Computers and Structures > CSiBridge 2015 folder. The "lservrc" file must be copied each time the 2016 license is activated on this machine. Once 2016 has been deactivated from this machine, CSiBridge 2015 (v17) will also stop working. 

• Network license – The CSiBridge 2016 (v18) license will reside on the server for a network license. Once the client machines have been updated to the correct version of CSiBridge 2015 (v17.3.0 RMS 8.6), the client machine will automatically pick up the CSiBridge 2016 network license.

Running CSiBridge 2014 (v16) using a CSiBridge 2015 (v17)  license

When running CSiBridge 2014 (v16) using a CSiBridge 2015 (v17), the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'PLUS', 'PLUSRATING', 'ADVANCED' or 'ADVANCEDRATING', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ADVANCED 2015 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • License file: The CSiBridge 2015 (v17) license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > CSiBridge 2015 folder into the Computers and Structures > CSiBridge 2014 folder. The "lservrc" file must be copied each time the 2015 license is activated on this machine. Once 2015 has been deactivated from this machine, CSiBridge 2014 (v16) will also stop working. 
  • Level.txt: The level.txt file will also be copied into the CSiBridge 2014 folder (Computers and Structures > CSiBridge 2014)

• Network license – The CSiBridge 2015 (v17) license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the CSiBridge 2014 folder which contains the CSiBridge.exe.

ETABS Examples

Running ETABS v17 using an ETABS v18 license

When running ETABS v17 using an ETABS v18 license, the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'PLUS', 'NONLINEAR', or 'ULTIMATE', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ULTIMATE 18 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • Web-Activated License:
    • License file: 
      • The ETABS v18 license must be activated on this machine. 
      • Copy the "lservrc" file from Computers and Structures > ETABS 18 folder into the Computers and Structures > ETABS 17 folder. 
      • The "lservrc" file must be copied each time the v18 license is activated on this machine. Once v18 has been deactivated from this machine, the ETABS v17 product will also stop working. 
    • Level.txt: The level.txt file will also be copied into the ETABS 17 folder (Computers and Structures > ETABS 17)
  • Manual License (such as license locked to USB key):
    • License file: Copy the ETABS v18 "lservrc" file into the Computers and Structures > ETABS 17 folder (from Computers and Structures > ETABS 18 folder). 
    • Level.txt: The level.txt file will also be copied into the ETABS 17 folder (Computers and Structures > ETABS 17)

• Network license – The ETABS v18 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the ETABS 17 folder which contains the ETABS.exe.

Running ETABS 2016 using an ETABS 17 license

When running ETABS 2016 using a ETABS 17 license, a level.txt is not required. 

Please see your licensing option below for the appropriate locations for where the activated license should reside: 

• Standalone license – 
  • License file: The ETABS v17 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > ETABS 17 folder into the Computers and Structures > ETABS 2016 folder. The "lservrc" file must be copied each time the ETABS v17 license is activated on this machine. Once the ETABS v17 license has been deactivated from this machine, ETABS 2016 product will also stop working. 

• Network license – The ETABS v17 license will reside on the server for a network license. Once the client machines have been updated to the correct version of ETABS 2016 (v16.2.2), the client machine will automatically pick up the ETABS v17 network license. 

Running ETABS 2015 using an ETABS 2016 license

When running ETABS 2015 using a ETABS 2016 license, a level.txt is not required. 

Please see your licensing option below for the appropriate locations for where the activated license should reside: 

• Standalone license – 
  • License file: The ETABS 2016 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > ETABS 2016 folder into the Computers and Structures > ETABS 2015 folder. The "lservrc" file must be copied each time the ETABS 2016 license is activated on this machine. Once the ETABS 2016 license has been deactivated from this machine, ETABS 2015 product will also stop working. 

• Network license – The ETABS 2016 license will reside on the server for a network license. Once the client machines have been updated to the correct version of ETABS 2015 (v15.2.3), the client machine will automatically pick up the ETABS 2016 network license. 

Running ETABS 2013 using an ETABS 2015 license

When running etabs 2013 using a etabs 2015 license, the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'PLUS', 'NONLINEAR' or 'ULTIMATE', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

NONLINEAR 2015 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • License file: The ETABS 2015 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > ETABS 2015 folder into the Computers and Structures > ETABS 2013 folder. The "lservrc" file must be copied each time the ETABS 2015 license is activated on this machine. Once ETABS 2015 has been deactivated from this machine, ETABS 2013 will also stop working. 
  • Level.txt: The level.txt file will also be copied into the ETABS 2013 folder (Computers and Structures > ETABS 2013)

• Network license – The ETABS 2015 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the ETABS 2013 folder which contains the ETABS.exe.

SAFE Example

Running SAFE 2014 using a SAFE 2016 license

When running SAFE 2014 using a SAFE 2016 license, a level.txt is not required. 

Please see your licensing option below for the appropriate locations for where the activated license should reside: 

• Standalone license – 
  • License file: The SAFE 2016 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > SAFE 2016 folder into the Computers and Structures > SAFE 2014 folder. The "lservrc" file must be copied each time the SAFE 2016 license is activated on this machine. Once the SAFE 2016 license has been deactivated from this machine, SAFE 2014 product will also stop working. 

• Network license – The SAFE 2016 license will reside on the server for a network license. Once the client machines have been updated to the correct version of SAFE 2014 (v14.2.1), the client machine will automatically pick up the SAFE 2014 network license. 

SAP2000 Examples

Running SAP2000 v21 using a SAP2000 v22 license

When running SAP2000 v21 using a SAP2000 v22, the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'BASIC', 'PLUS', 'ADVANCED' or 'ULTIMATE', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ADVANCED 22 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license –
  • Web-Activated License: 
    
    • License file: 
      • The SAP2000 v22 license must be activated on this machine.
      • Copy the "lservrc" file from Computers and Structures > SAP2000 22 folder into the Computers and Structures > SAP2000 21 folder.
      • The "lservrc" file must be copied each time the v22 license is activated on this machine. Once v22 has been deactivated from this machine, the SAP2000 v21 product will also stop working.
    • Level.txt: The level.txt file will also be copied into the SAP2000 v21 folder (Computers and Structures > SAP2000 21)
  • Manual License (such as license locked to USB key):
    • License file: Copy the SAP2000 v22 "lservrc" file into the Computers and Structures > SAP2000 21 folder (from Computers and Structures > SAP2000 22 folder). 
    • Level.txt: The level.txt file will also be copied into the SAP2000 v21 folder (Computers and Structures > SAP2000 21)

• Network license – The SAP2000 v22 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the SAP2000 21 folder which contains the SAP2000.exe.

Running SAP2000 v20 using a SAP2000 v21 license

When running SAP2000 v20 using a SAP2000 v21 license, a level.txt is not required. 

Please see your licensing option below for the appropriate locations for where the activated license should reside: 

• Standalone license – 
  • License file: The SAP2000 v21 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > SAP2000 21 folder into the Computers and Structures > SAP2000 20 folder. The "lservrc" file must be copied each time the v21 license is activated on this machine. Once v21 has been deactivated from this machine, SAP2000 v20 will also stop working. 

• Network license – The SAP2000 v21 license will reside on the server for a network license. Once the client machines have been updated to the correct version of SAP2000 v20.2.1, the client machine will automatically pick up the SAP2000 v21 network license. 

Running SAP2000 v19 using a SAP2000 v20 license

When running SAP2000 v19 using a SAP2000 v20 license, the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'BASIC', 'PLUS', 'ADVANCED' or 'ULTIMATE', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ADVANCED 20 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • Web-Activated license: 
    
    • License file: 
      • The SAP2000 v20 license must be activated on this machine. 
      • Copy the "lservrc" file from Computers and Structures > SAP2000 20 folder into the Computers and Structures > SAP2000 19 folder. 
      • The "lservrc" file must be copied each time the v20 license is activated on this machine. Once v20 has been deactivated from this machine, the SAP2000 v19 product will also stop working. 
    • Level.txt: The level.txt file will also be copied into the SAP2000 19 folder (Computers and Structures > SAP2000 19)
  • Manual License (such as license locked to USB key):
    • License file: Copy the SAP2000 v20 "lservrc" file into the Computers and Structures > SAP2000 19 folder (from Computers and Structures > SAP2000 20 folder). 
    • Level.txt: The level.txt file will also be copied into the SAP2000 19 folder (Computers and Structures > SAP2000 19)

• Network license – The SAP2000 v20 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the SAP2000 19 folder which contains the SAP2000.exe.

Running SAP2000 v18 using a SAP2000 v19 license

When running SAP2000 v18 using a SAP2000 v19 license, the level.txt file created will contain one line with the following information:

• Line 1: [Product Level] [Product Version]

Product level should be the level of the current license, for example: 'BASIC', 'PLUS', 'ADVANCED' or 'ULTIMATE', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ADVANCED 19 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • Web-Activated License: 
    
    • License file: 
      • The SAP2000 v19 license must be activated on this machine. 
      • Copy the "lservrc" file from Computers and Structures > SAP2000 19 folder into the Computers and Structures > SAP2000 18 folder. 
      • The "lservrc" file must be copied each time the v19 license is activated on this machine. Once v19 has been deactivated from this machine, SAP2000 v18 will also stop working. 
    • Level.txt: The level.txt file will also be copied into the SAP2000 18 folder (Computers and Structures > SAP2000 18)
  • Manual License (such as license locked to USB key):
    • License file: Copy the SAP2000 v19 "lservrc" file into the Computers and Structures > SAP2000 18 folder (from Computers and Structures > SAP2000 19 folder). 
    • Level.txt: The level.txt file will also be copied into the SAP2000 18 folder (Computers and Structures > SAP2000 18)

• Network license – The SAP2000 v19 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the SAP2000 18 folder which contains the SAP2000.exe.

Running SAP2000 v17 using a SAP2000 v18 license

When running SAP2000 v17 using a SAP2000 v18 license, a level.txt is not required. 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • License file: The SAP2000 v17 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > SAP2000 17 folder into the Computers and Structures > SAP2000 16 folder. The "lservrc" file must be copied each time the v17 license is activated on this machine. Once v17 has been deactivated from this machine, SAP2000 v16 will also stop working. 
  • Level.txt: The level.txt file will also be copied into the SAP2000 16 folder (Computers and Structures > SAP2000 16)

• Network license – The SAP2000 v17 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the SAP2000 16 folder which contains the SAP2000.exe.

Example: Running CSiBridge 2014 (v16) using a CSiBridge 2015 (v17)  license

•  – 
  • License file: The SAP2000 v18 license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > SAP2000 18 folder into the Computers and Structures > SAP2000 17 folder. The "lservrc" file must be copied each time the v18 license is activated on this machine. Once v18 has been deactivated from this machine, SAP2000 v17 will also stop working. 

• Network license – The SAP2000 v18 license will reside on the server for a network license. Once the client machines have been updated to the correct version of SAP2000 v17.3.0 RMS 8.6, the client machine will automatically pick up the SAP2000 v18 network license. 

Running SAP2000 v16 using a SAP2000 v17 license

When running SAP2000 v16 using a SAP2000 v17 licenseWhen running CSiBridge 2014 (v16) using a CSiBridge 2015 (v17), the level.txt file created will contain one line with the following information:

...

Product level should be the level of the current license, for example: 'PLUSBASIC', 'PLUSRATINGPLUS', 'ADVANCED' or 'ADVANCEDRATINGULTIMATE', etc. See level.txt for a list of levels for each CSI program. Product version should be the version number of the current license. 

For example:

ADVANCED 2015 17 

Please see your licensing option below for the appropriate locations for where the level.txt and activated license should reside: 

• Standalone license – 
  • License file: The CSiBridge 2015 (SAP2000 v17 ) license must be activated on this machine. Copy the "lservrc" file from Computers and Structures > CSiBridge 2015 SAP2000 17 folder into the Computers and Structures > CSiBridge 2014 folderSAP2000 16 folder. The "lservrc" file must be copied each time the 2015 v17 license is activated on this machine. Once 2015 v17 has been deactivated from this machine, CSiBridge 2014 (SAP2000 v16 ) will also stop working. 
  • Level.txt: The level.txt file will also be copied into the CSiBridge 2014 folder SAP2000 16 folder (Computers and Structures > CSiBridge 2014SAP2000 16)

• Network license – The CSiBridge 2015 (v17) license SAP2000 v17 license will reside on the server for a network license. The level.txt file will reside on the client machine, copied into the CSiBridge 2014 folder SAP2000 16 folder which contains the CSiBridgeSAP2000.exe.

...

Running SAP2000 v14 using a SAP2000 v15 license

When running SAP2000 v14 using a SAP2000 v15 Advanced license, the level.txt file created will contain the following two lines:

...

Related Email:

See Also

• Expedite software launch
• level.txt