Page History

{live-template:Test Problem}

h1. Overview

To simulate a two-span structure which is simply supported under dead load, and continuous under live load, a [staged construction|kb:staged construction] load case is defined with five stages, outlined as follows:

* Stage 1: Add two [frame|kb:Frame] objects, one for each span.

* Stage 2: Define frame end releases through Define > Named Property Sets > Frame Releases, then assign these moment releases to the start [joint|kb:Joint] of the second span.
\\
\\
Additional information is available in the [Staged-construction tips|kb:Staged construction tips] and [Staged-construction operations|kb:Staged-construction operations] articles.

* Stage 3: Apply load to the structure. Response will be as though the system is simply supported.

* Stage 4: Fix the moment end releases which are applied in Stage 2.

* Stage 5: Apply additional load to the structure. Response will now be as though the system is continuous.

\\

Structural response is presented in Figure 1:

\\

!2-span_girder_simply_supported_for_DL_and_continuous_for_LL.png|align=center,border=0!

{center-text}Figure 1 - Structural response{center-text}


h1. Attachments

* [SAP2000 V12.0.1 model |Two-span girder simply-supported for DL and continuous for LL^SAP2000 V12.0.1 model.zip] (zipped SDB file)