{live-template:Test Problem}
\\
The [P-Delta|kb:P-Delta effect] and Large-Displacement effects on a fully fixed cantilevered column are demonstrated and verified. [Scilab |http://www.scilab.org] numerical-computation software is used to verify selected values.
h1. Model description
The fully fixed cantilevered-column model has the following properties:
* Length: L = 10m
* Cross-section: 0.1m x 0.1m square
* Concrete modulus: E = 30GPa
* Axial load: F{~}v~ = 4kN (compression)
\\
\\
F{~}v~ is chosen as 70% of the critical buckling load, where P{~}cr~ = {math}\pi{math}{^}2^ EI / 4L{^}2^ = 6.168kN
* Lateral load: F{~}H~ = 0.045kN
\\
\\
F{~}H~ is chosen to cause an elastic deflection of 0.06m, where {math}\Delta{math} = PL{^}3^ / 3EI
\\
!P-delta_and_large_displacement_for_cantilever_column.png|align=center,border=0!
{center-text}Figure 1 - Cantilevered-column buckling parameters{center-text}
h1. Results
Results obtained from [SAP2000|sap2000:home] and [Scilab |http://www.scilab.org] are summarized in the tables below. The analysis process integral to Scilab software utilizes the stiffness and geometric matrices described in Dr. Edward L. Wilson's text {link-window:href=http://orders.csiberkeley.com/SearchResults.asp?Cat=2}{_}Static and Dynamic Analysis of Structures_ {link-window}. Additional details are included in the attached Scilab [input file |P-Delta effect for a cantilevered column^Scilab files.zip].
h2. Lateral tip displacement
|| Load Case || SAP2000 Value \\
\[m\] \\ || Scilab Value \\
\[m\] \\ ||
| *STATIC* (linear) | 0.06m | 0.06 m |
| *NLSTATIC1(1)* (nonlinear with P-Delta, 1 step) | 0.1677 m | 0.1677 m |
| *NLSTATIC1(10)* (nonlinear with P-Delta, 10 steps) | 0.1671 m | not calculated \\ |
| *NLSTATIC2(1)* (nonlinear with P-Delta and large displacements, 1 step) | 0.1676 m | not calculated |
| *NLSTATIC2(10)* (nonlinear with P-Delta and large displacements, 10 steps) | 0.1675 m \\ | not calculated \\ |
h2. Base moment
|| Load Case || SAP2000 Value \\
\[kN-m\] \\ || Scilab Value \\
\[kN-m\] \\ ||
| *STATIC* (linear) | 0.45 kN-m | 0.45 kN-m |
| *NLSTATIC1(1)* (nonlinear with P-Delta, 1 step) \\ | 1.121 kN-m | 1.324 kN-m |
| *NLSTATIC1(10)* (nonlinear with P-Delta, 10 steps) \\ | 1.120 kN-m | not calculated \\ |
| *NLSTATIC2(1)* (nonlinear with P-Delta and large displacements, 1 step) \\ | 1.120 kN-m | not calculated |
| *NLSTATIC2(10)* (nonlinear with P-Delta and large displacements, 10 steps) \\ | 1.120 kN-m \\ | not calculated \\ |
h2. Screenshots
Figure 2 presents a realization of the cantilevered-column model, subjected to a 6kN axial force. Stiffness and response are evaluated at 100 increments.
\\
!Figure 1.png|align=center,border=0!
{center-text}Figure 2 - Buckling analysis for a cantilevered column{center-text}
h1. Discussion
* Results from [SAP2000|sap2000:home] and Scilab indicate agreement between displacement values. A slight discrepancy exists between the moment values returned.
* When considering Large-Displacement effect, smaller lateral displacements result. There is no geometric limitation for the application of [P-Delta|kb:P-Delta effect] effect, which projects laterally from the column tip in a straight line. Large-Displacement effect, however, is bound by column length. As column rotation increases, the tip displaces along a curvilinear profile. As a result, given Large-Displacement effect, axial displacement should be larger.
h1. References
* Wilson, E. L. (2004). _Static and Dynamic Analysis of Structures_ (4th ed., pp. 120-121). Berkeley, CA: Computers and Structures, Inc.
Available for purchase on the CSI Products > {link-window:href=http://orders.csiberkeley.com/SearchResults.asp?Cat=2}Books {link-window} page
h1. Attachments
* [SAP2000 V14.2.4 model |P-Delta effect for a cantilevered column^SAP2000 V14.2.4 model.zip] (zipped SDB file)
* [Model variation with 100 steps and a 6kN axial force |P-Delta effect for a cantilevered column^model B V14.2.4 - 100 steps and 6 kN axial force.zip] (zipped SDB file)
* [Hand calculations |P-Delta effect for a cantilevered column^Hand calcs.pdf] (PDF)
* [Scilab input and output files |P-Delta effect for a cantilevered column^Scilab files.zip] (zipped OUT and SCE files) |