```{live-template:Test Problem} \\ This tutorial demonstrates [SAP2000|sap2000:home] *insertion-point* and end-offset application. Also presented are their associated effects, including those of *transform stiffness*. h1. Hand calculations \\ {viewpdf:name=Hand calcs.pdf} h1. Screenshots The visuals which follow illustrate the modeling and performance of two systems, one with default settings which transform stiffness to account for insertion-point offset, and one which does not transform stiffness. \\ !End_offsets_transform_stiffness_test_problem_1_-_geometry.png|align=center,border=0! {center-text}Figure 1 - Geometry{center-text} \\ !End_offsets_transform_stiffness_test_problem_1_-_extruded_geometry.png|align=center,border=0! {center-text}Figure 2 - Extruded geometry{center-text} \\ !End_offsets_transform_stiffness_test_problem_1_-_deflections.png|align=center,border=0! {center-text}Figure 3 - Deflections{center-text} \\ !End_offsets_transform_stiffness_test_problem_1_axial_forces.png|align=center,border=0! {center-text}Figure 4 - Axial forces{center-text} \\ !End_offsets_transform_stiffness_test_problem_1_moment_diagrams.png|align=center,border=0! {center-text}Figure 5 - Moment{center-text} h1. Attachments * [Hand calculations |Insertion point and transform stiffness^Hand calcs.pdf] (PDF file) * [SAP2000 Model |Insertion point and transform stiffness^SAP2000 V12.0.1 model.zip] (zipped SDB file)```