Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 32 Current »

Test Problem

Name:

Section cuts drawn within the graphical user interface

Description:

Draw section cuts within the graphical user interface using either 2D or 3D views.

Program:

SAP2000

Version:

14.1.0

Model ID:

na

On this page:

The process for drawing section cuts within the graphical user interface is demonstrated using a cantilevered frame system (Figure 1) which has 1m segments extending along the positive global Z axis, then X, then Y. A point load of Fx = 1kN, Fy = 10kN, and Fz = 100kN is applied to the free end. After analysis is run, section cuts are drawn to obtain section-cut forces.


Figure 1 - Caption



Section cut in 2D View

For section cuts drawn in a 2D View, the software automatically projects a quadrilateral cutting plane into the depth of the display. This depth is specified through Options > Dimensions and Tolerances > 2D View Cutting Planes +/-. Relevant parameters are shown in Figures 2 and 3:


Figure 2 - Section cut in 2D View


Figure 3 - Section-cut data

Attachments

  • No labels