Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 24 Next »


Time-history analysis provides for linear or nonlinear evaluation of dynamic structural response under loading which may vary according to the specified time function. Dynamic equilibrium equations, given by K u(t) + C d/dt u(t) + M d2/dt u(t) = r(t), are solved using either modal or direct-integration methods. Initial conditions may be set by continuing the structural state from the end of the previous analysis. Additional notes include:

  • Step Size – Direct-integration methods are sensitive to time-step size, which should be decreased until results are not affected.
  • HHT Value – A slightly negative Hilber-Hughes-Taylor alpha value is also advised to damp out higher frequency modes, and to encourage convergence of nonlinear direct-integration solutions.
  • NonlinearityMaterial and geometric nonlinearity, including P-delta and large-displacement effects, may be simulated during nonlinear direct-integration time-history analysis.
  • LinksLink objects capture nonlinear behavior during modal (FNA) applications.

Articles

Tutorials

TitleDescriptionProgram

Time-history analysis first steps

Overview of the procedure for time-history analysis.

SAP2000

Vibrating-machinery steel skid on piles

This tutorial demonstrates the modeling of vibrating machinery and its connection to a steel-skid structural system.

SAP2000

Test Problems

TitleDescriptionProgram

Human-induced vibrations

The modeling and analysis of human-induced vibrations due to footfalls or another type of impact.

SAP2000

Multi-pendulum model (Newton's cradle)

Model a pendulum system in SAP2000 using large-displacement time-history analysis.

SAP2000

Steady-state vs. time-history analysis

Test problems to demonstrate the differences and similarities between steady-state and time-history analyses.

SAP2000

See Also

  • No labels