Page tree
Title: Joint  
Author: Ondrej Aug 23, 2010
Last Changed by: Jessica Napier Mar 31, 2014
Tiny Link: (useful for email)
Export As: Word · PDF  
Incoming Links
Technical Knowledge Base (86)
    Page: Diaphragm constraint
    Page: Shell stress averaging
    Page: Accounting for internal joints which result from automeshing
    Page: Internal joint
    Page: Meshing FAQ
    Page: Shell FAQ
    Page: Connecting frame, shell, and solid elements
    Page: Hinge FAQ
    Page: Deflected configuration
    Page: Target force FAQ
    Page: Generalized displacements FAQ
    Page: Base reactions for response-spectrum analysis
    Page: Trapezoidal loads to shell objects
    Page: Cable tips
    Page: FNA application process
    Page: Power-spectral-density FAQ
    Page: Solid
    Page: Frame FAQ
    Page: Shells with no stiffness
    Page: Damping of stiff elements with inelastic softening
    Page: Composite behavior FAQ
    Page: Beams on an elastic foundation
    Page: Fixed DOF in links
    Page: Nonlinear buckling
    Page: Mass participation ratio
    Page: Influence-based moving-load analysis implementation
    Page: Derivation of response-spectrum equations
    Page: Pile lateral support based on P-y curves
    Page: Joint displacement and restraint
    Page: Subdivide frame objects
    Page: Time-history analysis FAQ
    Page: Troubleshooting Checklist
    Page: Displacement time-history record
    Page: Radial replicate
    Page: Educational version
    Page: Frame displacements shown on the "Diagrams for Frame Objects" form
    Page: Panel zones
    Page: Section cut FAQ
    Page: Bridge bearings FAQ
    Page: Lane definition using layout lines or frames
    Page: Local and global models
    Page: Bridge modeler FAQ
    Page: Section cut
    Page: Temperature
    Page: Constraint FAQ
    Page: Joint FAQ
    Page: Suspension bridge
    Page: Load combination
    Page: Frame
    Page: Truss
    Page: Acceleration loads
    Page: Constraint
    Page: Modal analysis FAQ
    Page: Accounting for deformed shape in staged construction
    Page: Contact surface
    Page: Lost accuracy
    Page: Response-spectrum analysis FAQ
    Page: Interpolation constraint
    Page: Auto lateral load FAQ
    Page: Joint DOF
    Page: Lane FAQ
    Page: Solid FAQ
    Page: Tendon
    Page: Equal constraint
    Page: Manual multi-support excitation
    Page: Accidental eccentricity for Response Spectrum Analysis
    Page: Loading tendons which are modeled as loads
    Page: Local axes of frames with offset joints
    Page: 12x12 stiffness of two-joint links
    Page: Load pattern
    Page: Beam-to-column connection
    Page: Mass
    Page: Bridge hinge
    Home page: Home
    Page: Line (edge) constraint
    Page: Constrained joints in staged construction
    Page: Tendon implementation in SAP2000
    Page: Discretization
    Page: Generalized displacements
    Page: Time-history output-acceleration accuracy
    Page: Interactive database editing
    Page: Special joint
    Page: Generating response-spectrum curves
    Page: Link
    Page: Applying advanced filters using SQL strings
    Page: Staged-construction tips
SAFE (1)
    Page: Slab-system moving-load analysis
    Page: Lost digit of accuracy and Ill-Conditions
    Page: Center of rigidity for semi-rigid diaphragm
    Page: Panel zone and rigid offset
    Page: Numerical instability
SAP2000 (7)
    Page: Disable update of punching-load data
    Page: Remove bracing from area load
    Page: Import DXF into SAP2000
    Page: Import DWG into SAP2000
    Page: Export SAP2000 to DXF
    Page: Export SAP2000 to SAFE
    Page: Export SAP2000 to DWG
Tutorials (14)
    Page: Time-history analysis first steps
    Page: Tuned-mass damper
    Page: Modeling simply supported shells
    Page: Joint pattern
    Page: Modeling a pin connection between crossing members
    Page: Joint renumbering
    Page: Complicated joint patterns
    Page: Manual modification of bridge bearings
    Page: Locate center of mass
    Page: Acceleration load in arbitrary direction
    Page: Create bulb-girder sections with rounded corners
    Page: Joint-pattern first steps
    Page: Section-cut first steps
    Page: Joint
Test Problems (7)
    Page: Acceleration loading
    Page: Frame to shell connections
    Page: Staged construction of a five-story column
    Page: Line and area springs
    Page: Modeling segmental-bridge joint openings
    Page: Two-span girder simply-supported for DL and continuous for LL
    Page: Body vs. equal constraint
Parent Page
    Home page: Home
Children (7)
    Page: Internal joint
    Page: Joint displacement and restraint
    Page: Joint DOF
    Page: Panel zones
    Page: Special joint
    Page: Joint FAQ
    Page: Merging joints
Global Labels (2)
Outgoing Links
External Links (1)
Technical Knowledge Base (13)     Page: Meshing
    Page: Time-history output-acceleration accuracy
    Page: Mass
    Page: Cable
    Page: Acceleration
    Page: Frame
    Page: Tendon
    Page: Link
    Page: Discretization
    Page: Constraint
    Page: Joint
    Page: Shell
    Page: Solid
Documentation (1)     Page: CSI Analysis Reference Manual